The HDfury is fantastic new device that screws on to any VGA (female) input and will
convert a HDMI signal and output it onto a VGA screen. Once screwed, it becomes a "part of the display" itself and will permanently perform an outstanding HDCP modification. Therefore, you can connect any HDMI source in Full HD 1080p to your now "enhanced" display hooked up with the HDfury module! You could play your Playstation 3, HD-DVD player, Blu-Ray Player or Xbox 360 Elite on your PC monitor or HDMI-less TV/projector at full high-def 1080p resolution!
Unlike other solutions, this revolutionary product doesn't even require that your screen be HDCP (High Definition Content Protection) compliant - as the device add HDCP to the display - producing a perfect, legal picture. What this means for you is that you don't have to worry that future consoles or players won't work with your screen - as long as your screen has a VGA input, you're all set for the future.
Since Sony introduced firmware 1.80 on the Playstation 3, it can upscale DVDs, PSOne games and PS2 games to 720p/1080p resolutions. BUT, this can only be done through the HDMI output - great news for HDFury owners.
Detailed Specifications :
DVI/HDMI(HDCP) input/convertor module for RGB display ("HD fury 1080prgb")
DVI-D 24p Female Port Input (100% digital).
A HDMI -> DVI-D cable can be use to connect to an HDMI source.
RGB 4:4:4 (8 bits) digital input (every HDMI source MUST be RGB 4:4:4 compatible).
Compatible with non-HDCP or HDCP sources.
Compatible with any RGB Display
Directly connect to VGA input.
Easy to install within a minute. (Plug and Play)
10 bits 175MHz triple video DAC - Inter-DAC : 2%
RGB-H/V Male Port D-SUB 15 Output video analog signals (0,7Vpp over 75 ohms impedance)
Ultra short Analog links (<1 cm) on the HD fury RGB 1080p for optimal quality.
DVI video bandwidth in VGA/RVB outputs: 25-165MHz
DVI Data Rate - Bandwidth 1.65 Gbps (Single link)
Maximum resolutions: UWXGA (1920x1200) at 60Hz or SXGA (1280x1024) at 85Hz Computer compatible (PC, Mac)
HDTV ready (480p/576p/720p/1080i/1080p48/50/60 compatible)
DVI1.0 compliant / HDMI interoperable and HDCP ready
HD-DVD and Blue Ray Disc players compatible
HDCP compatible with embedded keys loaded.
Energy management : DVI and VESA DPMS compatible.
Ultra low power consumption in Standby (3,5mA)
Maximum power : 0.4A under 5V (at 165MHz pixel clock)
On-board DC/DC converter (15V to 5V) with extra-low EMI signature
Power +5V from DVI/HDMI
Blue LED to display active digital link.
Low cost solution – Single IC solution
Small size : 75x56mm black cabinet
Blue version: comes with free 10-15cm VGA Xtender so you position the HDFury exactly where you want.
Installation: the RGB 1080p module is DIRECTLY screwed to the back of the display (where VGA/YUV SUB-D plugs stand).
Shortest RGB analog video link as possible
HDCP rules compliant: no end-user access to decrypted analog video. Once screwed, this module becomes "a part of the display itself".
Professional factory made (mass-production) using pick/place and reflow/wave solder pro. equipment.HDfury has a +5v input (ONLY needed if your HDMI cable is over 10 meters)
EDID detective feature: HDfury EDID eprom can be reprogrammed by your computer through it's Graphic Card ! (This feature is reserved for professionals/those who like to tinker)
Gold Plated connectors, tracks and material
